Scrape Film Evaporator
Particular features: 1. High heat transfer coefficient, large evaporation capacity, evaporation intensity can reach 200kg/m2·hr, and high thermal efficiency. 2. The material heating time is short, about 5 seconds to 10 seconds, and it works under vacuum conditions, which is more beneficial to heat-sensitive materials, keeping various components from decomposing and ensuring product quality. 3. […]
Falling Film Evaporator
Particular features Best product quality. Thanks to its gentle evaporation, mostly under vacuum, and extremely short residence times in the falling film evaporator. High energy efficiency. Due to its multiple-effect arrangement or heating by thermal or mechanical vapor recompressor. Usage of recovered waste heat. The evaporator can be heated by exhaust airstreams or hot water […]
Precision Filter
Duplex Filter
Particular features •Best product quality. Thanks to its gentle evaporation, mostly under vacuum, and extremely short residence times in the falling film evaporator. •High energy efficiency. Due to its multiple-effect arrangement or heating by thermal or mechanical vapor recompressor. •Usage of recovered waste heat. The evaporator can be heated by exhaust airstreams or hot water […]
Multifunctional Extraction Tank
Structure The structure of the slag gate adopts a cylinder to close the slag gate, and two adjacent cylinders are placed to push and rotate the rotor. The unique thread like structure of the rotating ring drives the slag gate to rise and lock with multiple wedge-shaped blocks. The slag gate is tightly sealed with […]
Percolation Tank
Ethanol Distillation Column
Centrifugal Pump
It is made of a cold-formed stainless steel casing, impeller, mechanical seal, pump cover, lantern and shaft, connected to the motor shaft by mechanical compression. The motor complies with the IEC standards, it is protected with a stainless steel shroud and provided with the height adjustable hygienic designed legs. Centrifugal pump is provided with an internal […]
Self-Priming Pump
Tunnel Spray Sterilizer
Working procedure 1. Preheating section: The containers(bottles, cans, or pouches) enter the tunnel and pass through a preheating area,where it is gradually heated to the desired pasteurization temperature by hot water spraying onto the surface of the containers. This helps to reduce the thermal shock to the product when it enters the pasteurization section. 2.Pasteurization […]
